How to do a good job in the maintenance of the candy production line
There is a limit to the frequency of use and the use of equipment, and it is not possible to run endlessly. Many manufacturers will use the frequency of equipment to exceed the limit of equipment operation.
1. There is a limit to the frequency of use and the use of equipment, and it is not possible to run endlessly. Many manufacturers will use the frequency of equipment to exceed the limit of equipment operation. Although it can get a good market value, it is not good for the market. The service life of equipment has a huge impact, and often the equipment is almost scrapped before the service life is reached. Therefore, it is very important to properly control the frequency of equipment use to relieve the equipment and allow it to complete more production and processing.
2. Troubleshooting. According to the analysis of previous cases, as long as the equipment fails, it needs to be solved immediately. Even if it cannot be solved, the equipment must be shut down. In fact, many small faults are caused by the accumulation of these small problems. It must be resolved immediately.
3. Dust cleaning. Long-term use of candy production equipment will leave a lot of dust. If the equipment is covered with dust and continues to work, it will not only affect the safety of candy and food, but also have a big problem in the heat dissipation of the motor. Dust blocks the heat dissipation holes. Let the motor continue to complete processing under high temperature, which will seriously affect the service life of the motor. It is very important to carry out necessary maintenance work. Clean up all the dust on the outer layer of the equipment and let the motor operating temperature be released. Even if continuous processing will not affect the motor .
4. Lubrication of accessories. The internal components of the equipment play an important role in the performance of the whole machine. However, under continuous processing, the wear effect of the accessories is intensified, and necessary lubrication is required, which can not only alleviate the wear degree of the accessories, but also play a certain protective role , prolong the service life of the equipment.